Farm Plastic Supply - Complete Garden Watering Kit for Up to 2,000 Sq/ft - Efficient, Customizable, and Easy to Install

This all-in-one irrigation system makes watering your garden effortless. Designed for easy setup, it connects directly to a standard outdoor spigot and provides a controlled, efficient way to keep your plants hydrated. With enough components to cover up to 2,000 square feet, this kit is perfect for gardens of all sizes.

1. Filtration & Pressure Control - The system begins with a filter to keep debris out, followed by a pressure regulator to maintain a steady, controlled water flow. A fitting is included to connect the regulator to the main hose.

2. Main Water Distribution - The included 100 ft 16mm (5/8") hose acts as the primary supply line, moving water to key areas in your garden. To customize the layout, the kit includes:

• 1 Tee Connector - Split the main hose into two directions.
• 2 Elbows - Make tight turns around corners.
• 3 Couplers - Reconnect sections of the main hose if cut.
• Up to 2 Valves - Allow control over different sections of the main line.
• 2 Line Ends - Properly seal the main line where needed.

3. Customizable Irrigation Setup - Use the included hole punch to create up to 15 connection points in the main header hose.

• 15 Barbed Connectors with Valves - Control water flow at each connection.
• 10 Goof Plugs - Patch any unwanted holes if needed.

4. Flexible Irrigation Lines - Attach the barbed connectors and cut the included 2,000 ft of 8mm (5/16") irrigation tubing to your desired lengths. Each line can be customized or kept uniform.

5. Essential End Fittings - The kit includes 15 end caps to properly seal each irrigation line.

6. Efficient Watering - Finally, install the irrigation emitters at the best spacing for even water distribution, ensuring optimal coverage for your garden.

With this kit, you get control over your irrigation system - saving time, water, and effort while keeping your plants healthy and thriving.

Supplies Included With Kit:

• Quantity 1: Filter 150 Mesh FHTxMHT
• Quantity 1:Press Regulator .1-7gpm 10psi
• Quantity 1:Power-Loc Adaptor FHTx16mm
• Quantity 1:Hose 18mm x 100'
• Quantity 1: Power-Loc Tee
• Quantity 2: Power-Loc Elbow
• Quantity 3: Power-Loc Coupler
• Quantity 2: Figure 8 16mm Line End
• Quantity 2: Power-Loc Valve 18mm
• Quantity 1: Toro 8mil 12" .45gpm/100' x 2000'
• Quantity 15: Tape x .25 Barb Adaptor w/Valve
  
• Quantity 3: Tape x Tape Loc Coupler
• Quantity 1: Hole Punch Tool 4mm
• Quantity 15: Netafim Tape End Closures
• Quantity 10: Goof Plugs

Instructions For How To Install Our Garden Irrigation Kits:

1. Screw together the garden faucet adaptor to the filter.
2. Screw the press regulator to the filter.
3. Screw the hose adaptor to the press regulator.
4. Screw the assembly to the faucet.
5. Insert the hose over the adaptor and secure with clamp.
6. Arrange hose as desired across the ends of the rows using the valves and fittings included. Secure w/ clamps. Do not install the plugs or line ends yet.
7. Punch hole at each row and connect the Tape-Loc x .250 Barb Adaptor.
8. Cut the tape to the desired length, install onto the adaptor and run down the row. The tape can be buried or layed on the surface. 
9. Turn the water on and allow to flush any debris through the ends of the lines.
10. Turn off the water and install the plugs, or line ends on the hose.
11. Turn the water water on and let it flush the lines of tape.
12. Beginning with the closest line, begin closing the tape lines. Simply fold the end over two or three times and place the economy closure over the folds to keep them in place.
13. Your system is complete!!

Shipping

Orders that are placed before 2pm CST will be shipped on the same day. Orders that come in after 2pm CST will ship the next day.

We utilize UPS and FedEx to deliver our orders. Products that weigh over 150lbs will be shipped with a freight carrier. Please call for any special accommodations. Rates are calculated based on the weight and size of ordered products and delivery location.